SUDAS Design Manual
All files are in pdf format. To read pdf files, you may need to download the free Adobe Acrobat Reader.
Table of Contents
Jump to the section you wish to review:
- Chapter 1: General Provisions
- Chapter 2: Stormwater
- Chapter 3: Sanitary Sewers
- Chapter 4: Water Mains
- Chapter 5: Roadway Design
- Chapter 6: Geotechnical
- Chapter 7: Erosion and Sediment Control
- Chapter 8: Recreational Trails and Sidewalk
- Chapter 9: Utilities
- Chapter 10: Street Tree Criteria
- Chapter 11: Street Lighting
- Chapter 12: Parking Lots
- Chapter 13: Traffic Signals
- Chapter 14: Trenchless Construction
Chapter 1: General Provisions
- Section 1A-1: General Conditions
- Section 1B-1: Classifications of Improvements and Definitions
- Section 1C-1: Submittals Procedures
- Section 1D-1: Detailed Plans for Construction of Public Improvements
- Section 1E-1: Public Improvements Contracts
- Section 1F-1: Plans of Record
- Section 1G-1: Proprietary Products
Chapter 2: Stormwater
- Section 2A-1: General Information
- Section 2A-2: RESERVED
- Section 2A-3: Stormwater Regulations and Permitting
- Section 2A-4: Stormwater Management Criteria
- Section 2A-5: Project Drainage Report
- Part 2B is RESERVED
- Section 2C-1: General Information for Stormwater Hydrology
- Section 2C-2: RESERVED
- Section 2C-3: Time of Concentration
- Section 2C-4: Rational Method
- Section 2C-5: RESERVED
- Section 2C-6: RESERVED
- Section 2C-7: Watershed Routing (Hydrograph Determination)
- Parts 2D-2F are RESERVED
- Section 2G-1: General Information for Detention Practices
- Parts 2H-2L are RESERVED
- Section 2M-1: General Information for Storm Sewer Design
- Section 2M-2: Groundwater Barriers and Outlets
- Section 2M-3: Street Flow and Intake/Manhole Capacity
- Section 2M-4: Storm Sewer Sizing
- Section 2N-1: General Information for Design of Culverts
- Section 2N-2: Culvert Hydraulics
- Section 2O-1: Channel Types and Structures
- Section 2O-2: Open Channel Flow
- Section 2P-1: Stormwater Easements
- Section 2Q-1: References
Chapter 3: Sanitary Sewers
This chapter has been revised and posted on the Supplemental Design Standards page; it will be printed with the 2013 Edition of the Design Manual.
- Section 3A-1: General Information
- Section 3B-1: Flow Determination
- Section 3C-1: Facility Design
- Section 3D-1: Pipe and Manhole Materials
- Section 3E-1: References
Chapter 4: Water Mains
- Section 4A-1: General Information
- Section 4B-1: Size Determination
- Section 4C-1: Facility Design
- Section 4D-1: References
Chapter 5: Roadway Design
- Section 5A-1: General Information
- Section 5B-1: Street Classifications
- Section 5C-1: Geometric Design Tables
- Section 5C-2: Geometric Design Elements
- Section 5D-1: HMA Pavement Mixture Selection
- Section 5E-1: PCC Pavement Mixture Selection (Section currently in development phase)
- Section 5F-1: Pavement Thickness Design Parameters
- Section 5F-2: Flexible Pavement Design Nomograph
- Section 5F-3: Rigid Pavement Design Nomograph
- Section 5G-1: Crack Control and Load Transfer
- Section 5G-2: Types of Joints
- Section 5G-3: Jointing Rural Intersections
- Section 5G-4: Jointing Urban Intersections
- Section 5G-5: Jointing Concrete Overlays
- Section 5H-1: Railroad Crossings
- Section 5I-1: General Access Management
- Section 5I-2: Limiting the Number of Conflict Points
- Section 5I-3: Driveway Spacing
- Section 5I-4: Driveway Design Criteria
- Section 5I-5: Removing Turning Vehicles from Through Traffic Lanes
- Section 5I-6: Reducing the Number of Turning Movements
- Section 5I-7: Other Improved Roadway Operations
- Section 5I-8: Pedestrian Safety
- Section 5J-1: Traffic Impact Studies
- Section 5K-1: Road Right-of-Way and Roadway Easements (Easements have been removed from the chapter but can be found under related documents/sample forms)
- Section 5L-1: References
Chapter 6: Geotechnical
- Section 6A-1: General Information
- Section 6A-2: Basic Soils Information
- Section 6A-3: Typical Iowa Soils
- Section 6B-1: Subsurface Exploration Program
- Section 6B-2: Testing
- Section 6B-3: Geotechnical Report
- Section 6C-1: Pavement Systems
- Section 6D-1: Embankment Construction
- Section 6E-1: Subgrade Design and Construction
- Section 6F-1: Pavement Subbase Design and Construction
- Section 6G-1: Subsurface Drainage Systems
- Section 6H-1: Foundation Improvement and Stabilization
Chapter 7: Erosion and Sediment Control
- Section 7A-1: General Information
- Section 7B-1: Regulatory Requirements
- Section 7C-1: The Erosion and Sedimentation Process
- Section 7D-1: Design Criteria
- Section 7E-1: Design Information for Erosion and Sediment Control Measures
- Section 7E-2: Compost Blanket
- Section 7E-3: Dust Control
- Section 7E-4: Grass Channel
- Section 7E-5: Mulching
- Section 7E-6: Permanent Seeding
- Section 7E-7: Temporary Rolled Erosion Control Products (RECP)
- Section 7E-8: Sodding
- Section 7E-9: Surface Roughening
- Section 7E-10: Temporary Seeding
- Section 7E-11: Turf Reinforcement Mats (TRM)
- Section 7E-12: Vegetative Filter Strip
- Section 7E-13: Check Dam
- Section 7E-14: Diversion Structure
- Section 7E-15: Level Spreader
- Section 7E-16: Rock Chutes and Flumes
- Section 7E-17: Rock Outlet Protection
- Section 7E-18: Flow Transition Mat
- Section 7E-19: Temporary Slope Drain
- Section 7E-20: Filter Berm
- Section 7E-21: Filter Sock
- Section 7E-22: Wattle
- Section 7E-23: Flocculents
- Section 7E-24: Flotation Silt Curtain
- Section 7E-25: Inlet Protection
- Section 7E-26: Sediment Basin
- Section 7E-27: Sediment Trap
- Section 7E-28: Silt Fence
- Section 7E-29: Stabilized Construction Exit
- Section 7F-1: Appendix
- Section 7G-1: References
Chapter 8: Recreational Trails and Sidewalk
- Section 1: General Information
- Section 2: Recreational Trail Design
- Section 3: Sidewalk Design
- Section 4: Easement Requirements (Easements have been removed from the chapter but can be found under related documents/sample forms)
- Section 5: Design Reference Material
Chapter 9: Utilities
- 9A-1: General Information
- 9B-1: General Information (for Trench Design)
- 9B-2: Rigid Pipes
- 9B-3: Flexible Plastic Pipes
- 9B-4: Ductile Iron Pipe
- 9B-5: Depth of Bury Tables
- 9C-1: Casing Pipe
- 9D-1: References
Chapter 10: Street Tree Criteria
This chapter has been revised and posted on the Supplemental Design Standards page; it will be printed with the 2013 Edition of the Design Manual.
Chapter 11: Street Lighting
- Section 1: General Information
- Section 2: Roadway Lighting Design
- Section 3: Design Reference Material
Chapter 12: Parking Lots
- Section 1: General Information
- Section 2: Site Provisions
- Section 3: Layout Design Criteria
- Section 4: Surface Design
- Section 5: Required Amenities
- Section 6: Design Reference Material
Chapter 13: Traffic Signals
- Section 13A-1: General Information
- Section 13B-1: Traffic Control Signal Needs Studies
- Section 13C-1: Features
- Section 13D-1: Design Considerations
- Section 13E-1: Specifications Information
Chapter 14: Trenchless Construction
- Section 14A-1: General Information
- Section 14B-1: Planning a Bore
- Section 14B-2: Methods of New Construction
- Section 14C-1: Evaluation of Existing Conditions for Rehabilitation
- Section 14C-2: Pipeline Rehabilitation
- Section 14C-3: Utility Access Rehabilitation
- Section 14D-1: References
Page last revised: January 24, 2012
© Copyright Iowa SUDAS Corporation 2004–2011. All rights reserved. Published and distributed by Iowa State University, Institute for Transportation under license. Except as provided in the Terms and Conditions of Use of the Iowa Statewide Urban Design Standards for Public Improvements and the Iowa SUDAS Standard Specifications, reproduction of these manuals, or any portion thereof, is strictly prohibited without the written permission of the copyright owner or its authorized licensee.
